- Why use JoKi drum motor ?
-
- Purpose-built
design
- The JoKi drum motor is
purposely designed specifically for use on belt conveyors and associated material handling
equipment.
-
- Totally enclosed
- The motor, gear box and bearings are totally enclosed and sealed in a
steel shell, therefore they are unlikely to fail due to harmful environmental conditions
such as water, dust, dirt, grit, chemicals, grease, oil etc.
-
- Space-saving design
- Because the drive unit and bearings are mounted inside
the drum motor shell it takes up much less room than a conventional drive. No need for
costly extras like chains, v-belts, couplings, bearings, support structure and special
guarding.
-
- Safety
- The JoKi drum motor is probably one of the safest drives available
because the drive is totally enclosed and the external shafts are always stationary. The
only moving external parts are the drum shell and bearing housings.
-
- Low purchasing and
installation cost
- The JoKi is quite often less expensive than conventional drives
because it has fewer parts. Therefore less conveyor design and parts purchasing costs. It
is also much quicker and easier to install - certainly less than a quarter of the time
taken to fit a conventional drive.
-
- Low maintenance costs
- The end user also benefits from the JoKi because the drive requires no maintenance other than the recommended oil
change every 10,000 hours. In other words almost 5 years between oil changes based on an 8
hour /day 5 day working week.
-
- Efficiency
- The JoKi usually has a much higher efficiency from motor to shell
(drum face) than conventional drives, because it has fewer frictional losses, therefore
efficiencies of up to 97% can be achieved.
-
- Cleanliness
- Because the JoKi drive is totally
enclosed it cannot contaminate food stuffs, electrical components, plastics and other such
materials that must be kept perfectly clean during handling.
-
- Aesthetic appearance
- If installed correctly the JoKi always
looks good. Due to its compact size and smooth lines quite often the JoKi is never seen, because it is hidden away, out of sight within the conveyor
frame.
-
- Weight saving and
distribution
- Often the JoKi is lighter than conventional drives and because its weight is
evenly distributed within the conveyor frame, it is possible to reduce the cost of the
conveyor structure.
-
- Less parts
- A JoKi drive consists of the drum motor and two fixing brackets!
Conventional drives can require up to 8 or more separate components, most of which have to
be purchased from different suppliers or manufactured specially.
-
- Low noise
- Thanks to the totally sealed enclosure and high quality
gears the JoKi runs almost at a whisper - a very important fact in today's modern
factory environments.
-
- The JoKi drum motor conveyor drive
- >> FIT
IT AND FORGET IT <<
-
-
[ Apron Conveyors & Feeders ] [ Belt Conveyors ] [ Bucket Elevetors ] [ Chain/Enmasse Conveyors ] [ Cranes EOT & HOT ] [ Deep Pan Conveyors ] [ Forklift Electric & Diesel Trucks ] [ High-Rise Conveyors ] [ Hoists Electric & Chain Wire Rope ] [ Pipe Conveyors ] [ Roller Conveyors ] [ Sampling Systems ] [ Scraper Chain Conveyors ] [ Screw Conveyors & Feeders ] [ Slat Conveyors ] [ Stacker & Reclaimers ] [ Table Feeders ] [ Joki Drum Motor ]
|
